Accessories

Union Camber Disk

The Union Camber disk adds a small amount of camber to the mounting disk to help keep your mounting hardware tight all season long.

• Disc construction: Polycarbonate (Do Not Use Loc-Tite)
• Board Compatibility: 4x4, 2x4, The Channel

Pack of 2 disc plates.

Full Set of Mounting Hardware

8 x 14mm screws
8 x washers

Storage Bag

Union Highback to Ankle Strap Hardware

Helps previous generation Union bindings with loosening ankle hardware or replaces lost, worn, or stripped Union ankle hardware.

Features:

Ankle Screw x 4
Ankle Washer Exterior x 4
Ankle Washer Interior x 4
Ankle Barrel x 4
Coated with Nylock for Maximum Screw Retention
Grade 8.8 Steel

Compatibility:
All Union Bindings (2016 - Onwards)

his fun 'Bubble' design adhesive stomp pad let you place it right where extra grip is needed when they're pushing through the lift line.

Features

• Rubber
• Peel and Stick Using 3M Adhesive Backing

Adjust your stomp pad to suit your setup with the Big Cheese Stud Stomp, letting you place them right where you need it for extra grip when you're one-footing it.

Features

• Peel and Stick Using 3M Adhesive Backing. Pack of 6 Studs. Sold Individually by Colour.

9x Metal Chrome Stomps

The Volcom Crushed Can Stomp Pad might look like your lift line recycling, but it's actually a sweet tool for snow removal that doubles as a gag for your friends.

1 Per pack

Dimensions: 3.9' inches each

Put an end to the senseless winter war of your feet fighting a slippery topsheet with this extra grippy Peace of Foam.

TECHNOLOGIES:

Fast in, fast out - Union aluminum ratchets are easy to use and made to stand the test of time.

Includes:

Aluminum Toe Ratchet x 2
Ratchet Screw x 2

Compatibility:

All Union Bindings (2016 - Present) featuring toe strap with screw from the top. 

Fast in, fast out - Union aluminum ratchets are easy to use and made to stand the test of time.

Includes:

Aluminum Ankle Ratchet x 2
Ratchet Screw x 2

Compatibility:

All Union Bindings (2016 - Present)

A spare set of every screw, washer, and insert needed to mount your Burton EST bindings to The Channel.

Sometimes the mounting hardware that comes with your board gets lost. Don't let that unfortunate event leave you stuck on the couch. Instead, plan ahead by picking up everything you need – screws, washers and inserts – to properly mount your Burton EST bindings to The Channel.

Features:

• Mounts Burton EST Bindings to The Channel
• Includes Four M6x13 Screws with Four Tabbed Washers and Four Board Inserts
• 1-Year Warranty

Polystick for repairing deep scratches and other damage to ski and snowboard bases.

Polyethylene Stick

For repairing ski and snowboard bases

Easy to work with

Temperature range from -4°C to +4°C. Liquid glide wax for training that can be used alone or as a base layer for racing glide wax. The CH08XL is extremely versatile on both sides of zero and has excellent feedback from racing. It works just as well on old snow at minus temperatures as on falling snow and plus degrees. Quite simply a “must have” product for conditions you will meet frequently.

This is the predecessor to our latest liquid glide wax called HS8. Both products are based on the same chemical formulas and thus have the same properties on the skis, but come in different packaging.

Super fluid and very durable glide wax for training. Temperature range from -2°C to -7°C. Liquid glide wax for training that can be used alone or as a base layer for racing glide wax. CH07XL is at its best in typical winter conditions, below 0°C. It can cope well with various snow conditions, regardless of humidity. A safe choice that rarely underperforms within its core area.

Medium coarse file, chrome-plated. 20 cm, 14 tpcm. Good for filing both side edges and base edges.

Details:

• File for treating steel edges
• For snowboards and alpine skis
• For alpine skiers and ski workshops
• Sharp and exact

TS7B is a versatile wax suitable for normal winter conditions below freezing. Its hardness makes it easier to work with and it is easy to achieve a good end result. The black additive reduces friction on cold and contaminated snow. This is a very popular wax in alpine and cross-country skiing, and has shown good performance on artificial snow, as well as on naturally transformed older snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS7B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 150°C.

Details:

• Excellent dry friction properties
• Dirt repellent
• Gives good glide in typical winter conditions
• A good choice on artificial snow.

Diamond stone for polishing and coarse stone for grinding edges. Ski brake retainers included. Ergonomic file guide with 80 mm file.

Details:

• 3-in-1 solution for steel edge repair
• Ergonomic file guide
• Diamond grindstone and coarse grindstone

Longer then a Grab Rail, yet shorter then a Skate Rail, The Bone provides the perfect topsheet grip to bone out your grabs.  This foam, is bad to the bone.

Details:

• C-Foam - Specifically formulated rubbery foam blend that’s lightweight, heavy duty, and grabs like a crab. 
• Screw Glue - Glued on. Like it was screwed on.
• Gripples - Signature texture: tiny little gripping nipples for maximum grippy-ness..
• Foam squishes into the tread on your boot creating a solid bond.
• Foam is lightweight and feels nice. 
• Foam doesn’t look like some heinous chunk of plastic stomp pad you’d find on a rental board.
• 1 Per Pack
• 8" x 2"

A full logo rendered in soft, squishy Dual C-Foam. Lightweight, heavy duty, and coated in our signature Gripple Texture.

Details:

• ROUND! - No sharp, dangerous corners.
• DUAL C-FOAM - Double the foam for double the fun.
• SCREW GLUE - Glued on. Like it was screwed on.
• GRIPPLES - Signature texture: tiny little gripping nipples for maximum grippy-ness.
• Foam squishes into the tread on your boot creating a solid bond.
• Foam is lightweight and feels nice. 
• Foam doesn’t look like some heinous chunk of plastic stomp pad you’d find on a rental board.
• 1 per pack 
• Dimensions: 12 cm 

Want to be fast like Daron? Keep dreaming! WEND Nano-Tech Speed Paste Wax is designed for a durable, fine film rub-on application, sure to keep you at the head of the pack (but still behind Daron).

A blend of waxes with the addition of our Nano-Tech additives for speed. A high performance paste formula for skiers looking to be out in front no matter the snow conditions. 

Details:

• Using included applicator, apply evenly
• Let dry 
• Polish with felt and then brush

For winter snow that’s on the warmer side of the spectrum, wax your skis or board with Wend NF Performance Warm. This bulk wax has a bit of Wend’s famous MeadowFoam component, a botanical oil extracted from flowers. MeadowFoam helps the wax penetrate and adhere to your bases for a smoother ride and longer durability. This soft wax has a low melting point and is easy to work with.

Details:

• Non fluorinated wax for skis and snowboards
• Universal formula, for temperatures above -12C to +4
• 100g bulk bar (3.5oz)
• Set wax iron to 140F (60C)
• Contains MeadowFoam oil