Wax & Tuning

Swix

Swix HS8 Wax 180gm

$79.50

HS8 is a popular glide wax for both base preparation and training.

High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suited for both training and racing.

How to apply HS8: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 150°C.

HS8 is available as both wax and liquid products.

Details:

A favorite for Nordic skiing disciplines
A good base wax for topping wax
Replaces LF8X.
For training and racing
HS8 is recommended from -4 to +4 degrees.
Easy to work with
Improves ski glide
Fluoro-free and 100% biodegradable
Thoroughly tested in different conditions

Wend

Wend Non-Fluoro MF Race Wax 100g -12C to -4C

$79.99

This wax breaks the mold when it comes to traditional racing waxes. Incorporates natural ingredients that out perform and outlast the rest. WEND NON-FLUORO gives your race ski's/board the ultimate advantage on the flats.

MF Waxes contain a high percentage of Meadowfoam which works similar to fluoro, yet is bio friendly, resists dirt, and conditions your base significantly better!

Meadowfoam is an all-natural plant based wax ingredient that is a safer, biodegradable alternative to fluorocarbon. Specifically designed to increase durability and base penetration, resistance to dirt and better glide. Supporting sustainability without compromising performance.

Wend Non-Fluoro MF Race Wax 100g -12C to -4C

Swix

Swix HS7 180g Wax

$79.50

HS07-18

HS7 VIOLET, -2°C/-8°C, 180G

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F).

HIGHLIGHTS

Fantastic allround-glider
For training and competition
Great performance and durability
Fluoro-free and non-toxic
Well tested on many conditions

Swix

Swix HS10 180g Wax

$79.50

HS10-18

HS10 YELLOW, 0°C/+10°C, 180G

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F).

HIGHLIGHTS

For warm conditions
Easy to work with
For training and competition
Great performance and durability
Fluoro-free and non-toxic
Well tested on many conditions

Swix

Swix DHF104BW Marathon, 40g

$79.00

High fluor wax with additive, Suits conditions from 0ºC to +20ºC, For racers and enthusiasts, Great for marathon races

0°C to +20°C. A hard durable glide wax for long distance cross country racing. Developed especially for wet dirty contaminated snow. High Fluor content. The hard consistency absorbs less dirt in wet conditions and works well in cold conditions. BW additive is for reduced friction against dirt particles. The BW additive is also positive in cold conditions when there is partially dry friction.

Swix

Swix HF10X Yellow 40g

$89.00

HF10X YELLOW, 0°C/10°C, 40G

Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). HF10X is made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a snowboard/ ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm.

Refine